Rotary Card Blister Sealing Machine

About Rotary Card Blister Sealing Machine

Rotary card blister sealing machines heat-press pre-formed PVC/PET blisters onto printed paper cards or Tyvek for retail and medical packs. Sliding or multi-station rotary tables let operators load while sealing for continuous output. CECLE supplies 7 blister sealing machines.

How to Choose

  • Choose table type: sliding shuttle for low volume, rotary 3-station for continuous, 4-station for higher throughput.
  • Match seal area and cavity count to your card size; multi-cavity molds seal several packs per cycle.
  • Confirm material: PVC, PET/PETG blisters, and Tyvek for medical-grade heat pressing.
  • Pick heating: pulse/platen heat for carded retail, HF welding (27.12 MHz) for strong PVC seals.
  • Check air supply (0.4–0.8 MPa compressor), voltage (110/220/380V) and CE compliance.

Model Selection Guide

The models below are real CECLE products in this series. Contact us or see doc.cecle.net for full specifications and a quote.

Model Description
BS-2030 Benchtop manual-slide semi-auto blister sealer; sealing area 200×300 mm; for small-batch sampling.
BS-2037 Benchtop auto-slide semi-auto sealer; sealing 200×370 mm; compatible with Tyvek medical card.
BS-3180 Vertical 3-station rotary heat-press sealer, bottom-mold heat; sealing 540×380 mm; standard-parts mass production.
BS-5030 Vertical 3-station rotary heat-press sealer; sealing 500×300 mm; customizable multi-cavity molds.
BS-5070 Vertical 2-station rotary heat-press sealer; sealing 700×500 mm; for large products.
UBS-5030 Vertical 3-station rotary flat-press sealer; sealing 300×500 mm; for irregular thin-wall PET.
HFQ-02 2-station CNC square-table manual-slide HF welder; heating plate 200×350 mm; pneumatic/hydraulic optional, low cost.
HFQ-03 3-station manual turntable HF welder; heating plate 200×350 mm; higher single-operator output.
HFQ-04 3-station auto turntable semi-auto HF welder; 8 kW; PLC full-auto control + spark protection.
HFQ-05 3-station auto turntable servo-robot HF welder; 8.5 kW; unmanned auto-unload, can link to line.

FAQ

Q: Does a blister sealer also form the blister?
A: No—a sealing machine only heat-presses a pre-formed blister to a card or Tyvek; you need a separate thermoforming machine to make the blisters.

Q: Rotary or sliding-table blister sealer?
A: Sliding shuttle suits low/batch runs; a 3–4 station rotary table lets operators load while another station seals, raising throughput for mass production.

Q: Can it seal medical Tyvek and thick PET?
A: Yes—heavy-duty pneumatic sealers with 0.35T+ pressure and adjustable heat handle thick PET blisters and DuPont Tyvek for medical device packs.