Skip to product information
1 of 6

CECLE Machine

DF8-02 Spout Pouch Filling Machine for Stand-Up Pouches (Semi-Automatic)

DF8-02 Spout Pouch Filling Machine for Stand-Up Pouches (Semi-Automatic)

Regular price $4,999.00 USD
Regular price Sale price $4,999.00 USD
Sale Sold out
Taxes included. Shipping calculated at checkout.
Shipping method
Model
Quantity
Quick Answer: The CECLE DF8-02 is a Spout Pouch Filling Machine designed for Stand-Up Pouches with a filling speed of 10 - 30 times/min, engineered for stable, repeatable commercial-scale production.

CECLE DF8-02 vs. Traditional / Generic Alternative

Where CECLE DF8-02 stands out against the conventional alternative — measured on the dimensions buyers care about most.

Volume Coverage
CECLE DF8-02One gear-pump head covers 30 to 2,000 ml, so a sample pouch and a 2 L refill run on the same machine without changing the pump.
AlternativePiston fillers are built around one stroke volume, and every new pack size means a new cylinder.
Dosing Control
CECLE DF8-02Each fill volume is set on its own servo motor, so a new SKU weight is typed on screen rather than shimmed mechanically.
AlternativeA single machine-wide adjustment moves every head at once, and correcting one weight means stopping the line.
Changeover
CECLE DF8-02Gear pump, tank and head are clamp-fit and the screen runs an automatic clean cycle, so a colour change is minutes, not a shift.
AlternativeThreaded fittings and fixed piping trap product in the line, and cleaning means a full strip-down.
Pouch Formats
CECLE DF8-02Stand-up, spout, Doypack and flat pouches all run at the same nozzle position, with the pitch set on screen.
AlternativeA fixed pouch nest only accepts the format it was cut for, and a new bag shape needs new tooling.

Technical Specifications

Specification Value & Unit
Model DF8-02
Filling Range 30 - 2,000 ml
Filling Nozzle 1 nozzle, one head one cylinder; single or two head optional
Filling Speed 10 - 30 times/min
Filling Accuracy Within 1%
Metering Gear pump, each fill set by its own servo motor
Pouch Type Stand-up pouch / spout pouch / Doypack / flat pouch
Control Mode Electric and pneumatic
Automatic Grade Semi-auto or automatic
Voltage 220 V 50/60 Hz
Air Pressure 0.5 - 0.8 MPa
Air Consumption 0.5 m³/h
Sealing Material Silicone O-ring (200 °C) standard, rubber ring for corrosive products
Cleaning Clamp quick-release, tool-free partial strip-down plus one-button clean cycle
G.W./N.W. 68 kg (149.9 lb)
Packing Dimension 80 × 90 × 70 cm
MOQ 1 set

Pre-installation requirements: Voltage: 220 V 50/60 Hz; Air Pressure: 0.5 - 0.8 MPa; Packing Dimension: 80 × 90 × 70 cm. External air compressor (3 HP / 2.2 kW or above) required.

Compatible Applications & Materials

  • Stand-Up Pouches — a core application for this Spout Pouch Filling Machine line

Standard Operating Procedure (SOP)

  1. Pre-start check: set air pressure to 0.5-0.8 MPa, confirm 220 V 50/60 Hz power and lock all clamps on the tank and lines.
  2. Loading: pour the product into the storage tank and confirm there are no particles or lumps.
  3. Parameter setting: select the pouch type and pitch on screen, then set the filling volume per pouch between 30 and 2,000 ml.
  4. Trial fill and calibration: fill 3-5 pouches consecutively and weigh them, fine-tuning the volume to the target net content.
  5. Batch filling: trigger with the foot pedal or button in semi-automatic mode, or switch the machine to the automatic cycle.
  6. Filling head lifting: the head lowers close to the pouch mouth during filling and lifts automatically afterwards, which reduces clinging and foam.
  7. Product changeover and cleaning: run the automatic cleaning cycle, and if needed release the clamps to brush the gear pump and filling head.
  8. Shutdown: drain the residual product, clean the lines and disconnect air and power.

Engineering FAQ

What pouch capacities can the DF8-02 fill?
A: 30–2000 ml. Pouches below 30 ml or above 2 L require a different model.

What filling accuracy can it achieve?
A: Within 1%. Each filling volume is controlled independently by a branded servo motor, not adjusted for the machine as a whole.

Can it fill paste or products with particles?
A: Not recommended. The machine is designed for free-flowing liquids (water, oil, juice without particles, detergent, sauce, beverage, liquid cream); pastes and particle-containing products require a different model.

Is cleaning difficult when changing products?
A: The gear pump, storage tank and filling head are all clamp-connected and can be partly disassembled for cleaning without tools; the main control screen has a one-button automatic cleaning function, keeping downtime short when changing product or color.

Does it need an air compressor?
A: Yes. Working air pressure 0.5–0.8 MPa with air consumption 0.5 m³/h — a standard small air compressor is sufficient ( the compressor is not included with the machine and must be supplied separately ).

What are the power requirements?
A: 220 V 50/60 Hz. For export to 110 V countries a transformer is required ( state the destination country voltage when ordering ).

Full Documentation & Drawings

Complete technical manual, parameters and engineering drawings: CECLE Docs — DF8-02

Related CECLE Machines

Request a Quote

Send your product specifications, target output and format details to CECLE for a tailored configuration, lead time and factory-direct quotation.

View full details