1 1

CECLE Machine

ZKS Series Vacuum Feeder for Powder & Granule (Pneumatic Drive)

ZKS Series Vacuum Feeder for Powder & Granule (Pneumatic Drive)

$3,180.00 USD
$3,180.00 USD
Sale Sold out
Taxes included. Shipping calculated at checkout.
Model
Shipping method
Quick Answer: The CECLE ZKS Series Electric Vacuum Feeder is a high-efficiency automated powder and granule conveying equipment powered by a high-quality vortex air pump (electric motor) as its vacuum source.

CECLE ZKS vs. Traditional / Generic Alternative

Where the CECLE ZKS stands out against manual or generic vacuum feeder — measured on the dimensions buyers care about most.

Vacuum Flow & Adhesion
CECLE ZKSThe ZKS Series Electric Vacuum Feeder uses a high-efficiency motor to generate high vacuum levels, drawing materials from silos or containers via negative pressure suction to the target equipment
Weak Vacuum SourceInsufficient suction leaves film lifted, bubbles trapped and seals loose under load.
Pressure Consistency
CECLE ZKSThe CECLE Vacuum Feeder holds working pressure steady across batches, cutting weak-output rejects.
Inconsistent Contact PressureForce drifts part to part, causing weak adhesion, wrinkled labels or misalignment.
Output Speed & Throughput
CECLE ZKSIt is tuned for continuous commercial throughput with minimal idle time.
Slow Manual CyclingLoading and cycling depend on operator pace, limiting real throughput and raising labor cost.
Operational Mechanism & Drive
CECLE ZKSIts drive removes operator-dependent variation, so output stays consistent.
Manual Lever OperationOutput depends on operator strength and drifts between shifts.

Technical Specifications

Model Conveying Capacity Motor Power Voltage Weight Machine Size
ZKS-1 1000 kg/h 1.5 KW 380V / 220V 45 kg Ø210*750 mm
ZKS-2 2000 kg/h 2.2 KW 380V 58 kg Ø250*850 mm
ZKS-3 3000 kg/h 3.0 KW 380V 75 kg Ø320*1000 mm
ZKS-4 4000 kg/h 4.0 KW 380V 90 kg Ø420*1150 mm
ZKS-5 5000 kg/h 5.5 KW 380V 115 kg Ø420*1250 mm
ZKS-6 6000 kg/h 7.5 KW 380V 140 kg Ø520*1400 mm

Compatible Applications & Materials

  • industrial products — primary target products for this Vacuum Feeder line
  • Standard industrial materials compatible with the machine's rated spec range
  • B2B production lines and contract manufacturing workshops

Standard Operating Procedure (SOP)

  1. Setup: connect the required power / air supply and verify the control display.
  2. Parameter preset: set speed / temperature / pressure per the product spec.
  3. Material loading: place the product in the correct fixture / mold slot.
  4. Execution: start the cycle; monitor for stable, repeatable output.
  5. Quality check: inspect the first units; adjust if deviation appears.
  6. Safety & cooldown: use Emergency Stop on abnormality; allow cooldown before maintenance.

Engineering FAQ

What is the difference between the ZKS Electric Vacuum Feeder and the QVC Pneumatic type? How should I choose?
A: The main difference lies in the power source. The QVC series relies on the factory's compressed air (pneumatic) to generate vacuum, featuring a lighter structure, and is suitable for environments with extremely high explosion-proof requirements and small to medium-volume material conveying. The ZKS series uses a high-frequency motor (electric) as its power source, providing greater suction power and longer conveying distances, making it suitable for workshops lacking high-volume air sources or scenarios requiring large-batch and heavy-material continuous conveying.

What types of materials is the ZKS series suitable for conveying?
A: It is very suitable for conveying various powders (such as pharmaceutical powder, flour, chemical powders), granular materials (such as capsules, tablets, plastic pellets), and powder-granule mixtures. The powerful negative pressure suction can easily handle high-density and bridge-prone materials, and it is widely used in pharmaceutical, food processing, and chemical production lines.

Does the equipment's filter clog easily? Is cleaning convenient?
A: The equipment is equipped with an efficient pulse reverse-blow system that automatically performs reverse pulse cleaning of the filter during each discharge cycle, effectively preventing dust blockage and ensuring stable vacuum levels during continuous operation. The entire machine features a quick-disconnect clamp design, making manual disassembly and cleaning of the filter element and chamber extremely convenient and fast.

What routine maintenance keeps the ZKS stable for long production runs?
A: Keep the working area clean, verify the rated power/air supply before each shift, and inspect wear parts per the technical manual. Stable input conditions are the main factor in consistent output and long service life.

Which product sizes and formats can the ZKS handle?
A: The machine is configured for its rated specification range (see Technical Specifications). For formats outside the standard range, CECLE can advise on tooling or model selection.

Full Documentation & Drawings

Complete technical manual, parameters and engineering drawings: CECLE Docs — ZKS

Related CECLE Machines

Request a Quote

Send your product specifications, target output and format details to CECLE for a tailored configuration, lead time and factory-direct quotation.

View full details