CECLE packaging machinery

SP-2008 Skin Packaging Machine for Industrial Products (Industrial Grade)

$2,399.00 USD

~~$1,799.00 USD~~ $2,399.00 USD

Sale Sold out

Taxes included. Shipping calculated at checkout.

Model SP-2008(540*390mm) SP-3970(390*700mm)

Shipping method by sea to door(30-40days) by sea to port(20-30days)

Quick Answer: The CECLE SP-2008 is a versatile, high-performance vacuum skin packaging machine designed for demanding industrial environments.

CECLE SP-2008 vs. Traditional / Generic Alternative

Aspect	CECLE SP-2008 (This Machine)	Traditional / Generic Alternative
Thermal Response & Heating System	Dual Heating Options: Lamp: High stability, long life, no frequent maintenance	Single Fixed Heating: Uses cheap quartz tubes with slow preheating, uneven heat distribution, and frequent element burnouts.
Chassis Rigidity & Vibration Resistance	Industrial Reinforced Design: At 230KG, it is heavier and more stable than entry-level models, perfect for high-intensity work	Lightweight Sheet Metal (<120 kg): Prone to chassis flex, frame warping over time, and seal leakage.
Forming Area & Batch Capacity	Large Workspace: 540mm * 390mm area allows for packing large items or multiple products at once	Restricted Table (<380 × 290 mm): Limits packaging to single small items, cutting hourly throughput by over 40%.
Vacuum Flow & Adhesion	Strong Vacuum System: Built-in 20m³/hour high-flow pump ensures perfect contouring and professional display quality	Weak 8–10 m³/h Pumps: Insufficient suction leads to loose packaging, trapped air pockets, and poor display aesthetics.

Technical Specifications

Specification	Value & Unit
Product Name	Vacuum Skin Packaging Machine
Parameter	Value
Voltage	220V or 380V / 50~60Hz
Packaging Area	540mm × 390mm (21.26" × 15.35")
Vacuum Pump Power	20m³/hour
Packing Speed	2~3 times/min
Heating Power	2 kW
Machine Size	104 × 80 × 154 cm
Net Weight	230 KG (507.1 lb)

Pre-installation requirements: Voltage: 220V or 380V / 50~60Hz; Vacuum Pump Power: 20m³/hour; Heating Power: 2 kW; Net Weight: 230 KG (507.1 lb).

Compatible Applications & Materials

industrial products — primary target products for this packaging line
Standard industrial materials compatible with the machine's rated spec range
B2B production lines and contract manufacturing workshops

Standard Operating Procedure (SOP)

Setup: connect power at the rated voltage (220V or 380V / 50~60Hz) and verify the control display.
Parameter preset: set speed / temperature / pressure per the product spec.
Material loading: place the product in the correct fixture / mold slot.
Execution: start the cycle; monitor for stable, repeatable output.
Quality check: inspect the first units; adjust if deviation appears.
Safety & cooldown: use Emergency Stop on abnormality; allow cooldown before maintenance.

Engineering FAQ

What power supply does the SP-2008 require?
A: The SP-2008 runs on 220V or 380V / 50~60Hz Voltage. Ensure the facility provides a stable supply at this rating; voltage mismatch can damage the drive or reduce performance.

What peripheral equipment should be prepared for the SP-2008?
A: Beyond the rated 220V or 380V / 50~60Hz Voltage supply, prepare the standard fixtures/molds for your product format and a clean, stable workbench. No special external compressor is required for this electric model.

What routine maintenance keeps the SP-2008 stable for long production runs?
A: Keep the working area clean, verify the rated power/air supply before each shift, and inspect wear parts per the technical manual. Stable input conditions are the main factor in consistent output and long service life.

Which product sizes and formats can the SP-2008 handle?
A: The machine is configured for its rated specification range (see Technical Specifications). For formats outside the standard range, CECLE can advise on tooling or model selection.