CECLE Machine

HP-1015 Sublimation Heat Press Machine for Pens (0.6T Transfer Pressure)

$209.00 USD

Sale Sold out

Taxes included. Shipping calculated at checkout.

Model HP-1015

Shipping method By Ocean+Express Only For US(About 30-40 days) By Express(About 5-10 days)

Quick Answer: The CECLE HP-1015 is a desktop pen heat press machine purpose-built for cylindrical pens with a sublimation coating.

CECLE HP-1015 vs. Traditional / Generic Alternative

Where the CECLE HP-1015 stands out against manual or generic heat press machines — measured on the dimensions buyers care about most.

Thermal Response & Heating System

CECLE HP-1015Anti-Rolling Design : Ordinary flat presses cannot print pens (they roll). This machine's grooved silicone pad locks pens firmly in place; combined with the precise downward pressure of the upper heating.

Single Fixed HeatingUses cheap quartz tubes with slow preheating, uneven heat distribution, and frequent element burnouts.

Precision & Consistency

CECLE HP-1015Dual-Display Digital Controller : Dual-screen display makes temperature and time settings clearer. After transfer completes, a "beep" alert sounds so workers need not stand by the machine and can perform other.

Analog / Blind OperationNo real-time parameter feedback; operators guess settings, so quality drifts batch to batch.

Pressure Consistency

CECLE HP-1015The CECLE Heat Press Machine holds working pressure steady across batches, cutting weak-output rejects.

Inconsistent Contact PressureForce drifts part to part, causing weak seals or incomplete transfer.

Output Speed & Throughput

CECLE HP-1015It is tuned for continuous commercial throughput with minimal idle time.

Slow Manual CyclingLoading and cycling depend on operator pace, limiting real throughput and raising labor cost.

Technical Specifications

Items	Specifications
Model	HP-1015
Working Area	10×15CM/3.9×5.9"
Power	350W
Voltage	110V/220V
Packaging Dimension	45×36×49CM / 17.7×14.2×19.3"
Gross Weight	11KG/24LB

Pre-installation requirements: Power: 350W; Voltage: 110V/220V; Packaging Dimension: 45×36×49CM / 17.7×14.2×19.3"; Gross Weight: 11KG/24LB.

Compatible Applications & Materials

Media : Blank high-temperature-resistant ballpoint pens with sublimation coating, dedicated sublimation ink, sublimation paper, Epson inkjet printer, computer, high-temperature tape. Power Supply : 110V or 220V power source.

Standard Operating Procedure (SOP)

Setup: connect power at the rated voltage (110V/220V) and verify the control display.
Parameter preset: set speed / temperature / pressure per the product spec.
Material loading: place the product in the correct fixture / mold slot.
Execution: start the cycle; monitor for stable, repeatable output.
Quality check: inspect the first units; adjust if deviation appears.
Safety & cooldown: use Emergency Stop on abnormality; allow cooldown before maintenance.

Engineering FAQ

What kind of pens can this machine print?
A: This machine can print ballpoint pens whose surface must have a "Sublimation Coating" and be high-temperature resistant.

Can this machine be used with 110V voltage in the United States?
A: Absolutely. We can provide you with customized 110V (North American standard) and 220V (European/Asian standard) models, equipped with power plugs that comply with your national standards.

What power supply does the HP-1015 require?
A: The HP-1015 runs on 350W Power. Ensure the facility provides a stable supply at this rating; voltage mismatch can damage the drive or reduce performance.

What peripheral equipment should be prepared for the HP-1015?
A: Beyond the rated 110V/220V Voltage supply, prepare the standard fixtures/molds for your product format and a clean, stable workbench. No special external compressor is required for this electric model.

What routine maintenance keeps the HP-1015 stable for long production runs?
A: Keep the working area clean, verify the rated power/air supply before each shift, and inspect wear parts per the technical manual. Stable input conditions are the main factor in consistent output and long service life.

Which product sizes and formats can the HP-1015 handle?
A: The machine is configured for its rated specification range (see Technical Specifications). For formats outside the standard range, CECLE can advise on tooling or model selection.