CECLE Machine

MY-380F Date Coding Machine for Cards, Bags & Labels (Automatic)

$480.00 USD

Sale Sold out

Taxes included. Shipping calculated at checkout.

Model MY-380F Ink Wheel

Shipping method By Express(5-7days) DAP term not including tax

Quick Answer: The CECLE MY-380F is a high-speed, fully automatic solid-ink coding machine designed for high-volume offline batch printing.

CECLE MY-380F vs. Traditional / Generic Alternative

Where the CECLE MY-380F stands out against manual or generic date coding machines — measured on the dimensions buyers care about most.

Operational Mechanism & Drive

CECLE MY-380FFully Automatic Operation: Features automatic paging and counting. Simply place a stack of materials on the feeder, and the machine separates and prints them individually

Manual Lever OperationOutput depends on operator strength and drifts between shifts.

Output Speed & Throughput

CECLE MY-380FHigh-Speed Performance: Reaches speeds of up to 300 pieces per minute, greatly improving efficiency for mass production

Slow Manual CyclingLoading and cycling depend on operator pace, capping real throughput and raising labor cost.

Pressure Consistency

CECLE MY-380FThe CECLE Date Coding Machine holds working pressure steady across batches, cutting weak-output rejects.

Inconsistent Contact PressureForce drifts part to part, causing weak seals or incomplete transfer.

Chassis Rigidity & Vibration Resistance

CECLE MY-380FIndustrial-Reinforced Frame: 23 KG (50.7 lb) Weight chassis eliminates vibration and keeps seals tight.

Lightweight Sheet Metal (<30 kg)Prone to chassis flex, frame warping over time, and seal leakage.

Technical Specifications

Specification	Value & Unit
Parameter	Value
Voltage	110V / 220V, 50/60Hz
Power	180 W
Printing Speed	Ma × 300 pcs/min
Material Length (L)	50 - 500 mm (1.96" - 19.68")
Imprint Position	60 - 250 mm (2.36" - 9.84")
Dimensions	44 × 34.5 × 30 cm (17.32" × 13.58" × 11.8")
Net Weight	23 KG (50.7 lb)

Pre-installation requirements: Voltage: 110V / 220V, 50/60Hz; Power: 180 W; Dimensions: 44 × 34.5 × 30 cm (17.32" × 13.58" × 11.8"); Net Weight: 23 KG (50.7 lb).

Compatible Applications & Materials

industrial products — primary target products for this Date Coding Machine line
Standard industrial materials compatible with the machine's rated spec range
B2B production lines and contract manufacturing workshops

Standard Operating Procedure (SOP)

Setup: connect power at the rated voltage (110V / 220V, 50/60Hz) and verify the control display.
Parameter preset: set speed / temperature / pressure per the product spec.
Material loading: place the product in the correct fixture / mold slot.
Execution: start the cycle; monitor for stable, repeatable output.
Quality check: inspect the first units; adjust if deviation appears.
Safety & cooldown: use Emergency Stop on abnormality; allow cooldown before maintenance.

Engineering FAQ

What power supply does the MY-380F require?
A: The MY-380F runs on 110V / 220V, 50/60Hz Voltage. Ensure the facility provides a stable supply at this rating; voltage mismatch can damage the drive or reduce performance.

What peripheral equipment should be prepared for the MY-380F?
A: Beyond the rated 110V / 220V, 50/60Hz Voltage supply, prepare the standard fixtures/molds for your product format and a clean, stable workbench. No special external compressor is required for this electric model.

What routine maintenance keeps the MY-380F stable for long production runs?
A: Keep the working area clean, verify the rated power/air supply before each shift, and inspect wear parts per the technical manual. Stable input conditions are the main factor in consistent output and long service life.

Which product sizes and formats can the MY-380F handle?
A: The machine is configured for its rated specification range (see Technical Specifications). For formats outside the standard range, CECLE can advise on tooling or model selection.