• L-200 High speed automatic round bottle labeling machine , PET water bottle label applicator - CECLE Machine
  • L-200 High speed automatic round bottle labeling machine , PET water bottle label applicator - CECLE Machine
  • L-200 High speed automatic round bottle labeling machine , PET water bottle label applicator - CECLE Machine
  • L-200 High speed automatic round bottle labeling machine , PET water bottle label applicator - CECLE Machine
1 5

CECLE packaging machinery

L-200 Labeling Machine for Bottles (Automatic)

L-200 Labeling Machine for Bottles (Automatic)

$1,980.00 USD
$1,980.00 USD
Sale Sold out
Taxes included. Shipping calculated at checkout.
Voltage:
Plug
Quick Answer: The CECLE L-200 is a semi-automatic labeling machine for round buckets and glass bottles. It applies self-adhesive labels to cylindrical containers — wine bottles, jars and pails — that are placed by hand and labelled in one cycle.

CECLE L-200 vs. Traditional / Generic Alternative

Where this CECLE machine stands out against manual or generic alternatives — measured on the dimensions buyers care about most.

Pressure Consistency
CECLE L-200Consistent Contact Pressure: The applicator presses every label with the same force, so labels sit flat with no wrinkles or air bubbles.
Inconsistent Contact PressureForce drifts part to part, causing weak adhesion, wrinkled labels or misalignment.
Output Speed & Throughput
CECLE L-200Continuous Automatic Feed: The conveyor and label feed run continuously, so throughput is set by belt speed rather than operator pace.
Slow Manual CyclingLoading and cycling depend on operator pace, limiting real throughput and raising labor cost.
Operational Mechanism & Drive
CECLE L-200Synchronised Label Feed: A motor-driven dispensing head keeps label peel timing matched to product spacing, so placement does not drift.
Manual Lever OperationOutput depends on operator strength and drifts between shifts.
Chassis Rigidity & Vibration Resistance
CECLE L-200Rigid Frame, Aligned Axes: A stiff frame keeps conveyor and applicator on the same axis, so label position holds steady across a shift.
Lightweight Sheet Metal ConstructionProne to chassis flex, frame warping over time, and drifting label placement.

Technical Specifications

Specification Value & Unit
Model Series Automation Level

Compatible Applications & Materials

  • industrial products — primary target products for this Labeling Machine line
  • Standard industrial materials compatible with the machine's rated spec range
  • B2B production lines and contract manufacturing workshops

Standard Operating Procedure (SOP)

  1. Setup: connect the required power / air supply and verify the control display.
  2. Parameter preset: set speed / temperature / pressure per the product spec.
  3. Material loading: place the product in the correct fixture / mold slot.
  4. Execution: start the cycle; monitor for stable, repeatable output.
  5. Quality check: inspect the first units; adjust if deviation appears.
  6. Safety & cooldown: use Emergency Stop on abnormality; allow cooldown before maintenance.

Engineering FAQ

What routine maintenance keeps the L-200 stable for long production runs?
A: Keep the working area clean, verify the rated power/air supply before each shift, and inspect wear parts per the technical manual. Stable input conditions are the main factor in consistent output and long service life.

Which product sizes and formats can the L-200 handle?
A: The machine is configured for its rated specification range (see Technical Specifications). For formats outside the standard range, CECLE can advise on tooling or model selection.

Full Documentation & Drawings

Complete technical manual, parameters and engineering drawings: CECLE Docs — L-200

Related CECLE Machines

Request a Quote

Send your product specifications, target output and format details to CECLE for a tailored configuration, lead time and factory-direct quotation.

View full details