packaging machine

HT-RB-300 Roller Heat Transfer Machine for Skateboard (Silicone Roller)

Name: HT-RB-300
Brand: CECLE
Price: 299.0 USD
Availability: InStock

$299.00 USD

~~$200.00 USD~~ $299.00 USD

Sale Sold out

Taxes included. Shipping calculated at checkout.

Shipping method (by express to door without tax)

Quick Answer: The CECLE HT-RB-300 is a semi-automatic pneumatic heat transfer machine designed for skateboard manufacturers and custom workshops.

CECLE HT-RB-300 vs. Traditional / Generic Alternative

Where the CECLE HT-RB-300 stands out against manual or generic heat transfer machines — measured on the dimensions buyers care about most.

Sealing / Transfer Quality

CECLE HT-RB-30045° Specialized Silicone Roller (Key Configuration): Equipped with a dedicated high-temperature resistant silicone roller with a hardness of 45° (Shore A). This specific hardness provides the ideal cushioning.

Uncontrolled Contact ConditionsEdges wrinkle, seals weaken or transfer is incomplete because pressure/heat are not synchronized.

Pressure Consistency

CECLE HT-RB-300Pneumatic Power System: Driven by a pneumatic system (requires an external air compressor) to deliver a consistent and powerful pressure output of up to 0.6T, ensuring a smooth and flawless printing process.

Inconsistent Spring/Manual PressureForce drifts with operator fatigue and batch size, causing weak seals and rejects.

Adaptability & Changeover

CECLE HT-RB-300Precise Temperature Control System: Features a wide temperature control range of 0–400°C with PID smart adjustments, making it perfectly adaptable to various skateboard substrate thicknesses and different.

Single-Format Rigid FramesSwitching product sizes requires lengthy mechanical changeover and extended downtime.

Output Speed & Throughput

CECLE HT-RB-300Rated 2 ~ 5 pcs/min Printing Speed: Built for steady commercial output with minimal idle time.

Slow Manual CyclingLoading and cycling depend on operator pace, capping real throughput and raising labor cost.

Technical Specifications

Specification	Value & Unit
Roller Hardness	45° (Shore A)
Heating Transfer Size	250 × 300mm (9.8 × 11.8 in)
Transfer Pressure	0.6T
Device Power	3 kW
Printing Speed	2 ~ 5 pcs/min
Input Voltage	220V/380V 50~60Hz
Air Pressure Requirement	0.6 ~ 0.8Mpa
Temperature Range	0 ~ 400℃
Machine Dimensions	1780 × 730 × 670mm (70.1 × 28.7 × 26.4 in)
Machine Weight	230KG (507.1 lb)

Pre-installation requirements: Device Power: 3 kW; Input Voltage: 220V/380V 50~60Hz; Air Pressure Requirement: 0.6 ~ 0.8Mpa; Machine Dimensions: 1780 × 730 × 670mm (70.1 × 28.7 × 26.4 in); Machine Weight: 230KG (507.1 lb). External air compressor (3 HP / 2.2 kW or above) required.

Compatible Applications & Materials

industrial products — primary target products for this Heat Transfer Machine line
Standard industrial materials compatible with the machine's rated spec range
B2B production lines and contract manufacturing workshops

Standard Operating Procedure (SOP)

Air Supply Connection: Connect the air compressor hose and adjust the pressure to the standard working range of 0.6–0.8Mpa
Power Up: Turn on the main Power Switch, and the dashboard display will light up
Speed Control: Turn on and adjust the Speed Controller to ensure the silicone roller starts rotating for uniform heat distribution
Temperature Preset: Set the required transfer temperature on the thermostat and wait for the heating roller to reach the target value
Execute Transfer: Manually place the skateboard deck and the transfer film
Once aligned, press the dual Operate Buttons simultaneously
Safety Monitoring: In case of any abnormality during operation, immediately hit the red Emergency Stop button

Engineering FAQ

Is the 230kg weight stable enough under high-pressure operations?
A: Absolutely. The 230kg weight is scientifically optimized. With a low and evenly distributed center of gravity, the machine remains rock-steady without any vibration or shifting, even under 0.6T of pressure.

Why does the silicone roller need to keep spinning after turning off the heat?
A: If the silicone roller stops spinning while still at a high temperature, gravity and localized residual heat will cause permanent flat spots or deformation. Keeping it rotating during the cooling phase greatly extends the lifespan of the 45° silicone roller.

What does the 0.6T Transfer Pressure requirement mean for the HT-RB-300?
A: The 0.6T Transfer Pressure is the working condition needed for consistent, repeatable results. Operators must supply a stable source at this level; fluctuations cause defects.

What peripheral equipment should be prepared for the HT-RB-300?
A: Beyond the rated 220V/380V 50~60Hz Input Voltage supply, prepare the standard fixtures/molds for your product format and a clean, stable workbench. No special external compressor is required for this electric model.

What routine maintenance keeps the HT-RB-300 stable for long production runs?
A: Keep the working area clean, verify the rated power/air supply before each shift, and inspect wear parts per the technical manual. Stable input conditions are the main factor in consistent output and long service life.

Which product sizes and formats can the HT-RB-300 handle?
A: The machine is configured for its rated specification range (see Technical Specifications). For formats outside the standard range, CECLE can advise on tooling or model selection.