CECLE packaging machinery

HT-150 Heat Transfer Machine (Industrial Grade)

Name: HT-150
Brand: CECLE
Price: 4500.0 USD
Availability: InStock

$4,500.00 USD

Sale Sold out

Taxes included. Shipping calculated at checkout.

Voltage 220V/110V

Shipping method By sea to door (25-40 days)

Quick Answer: The CECLE HT-150 is a semi-automatic heat transfer machine that prints multi-colour graphics from a transfer film onto the workpiece. The operator loads the part while the machine handles the press stroke and film feed, so transfer quality stays even.

CECLE HT-150 vs. Traditional / Generic Alternative

Where the HT-150 stands out against manual or generic alternatives — measured on the dimensions buyers care about most.

Precision & Consistency

CECLE HT-150One-Pass Multi-Color Printing: No need for multi-color registration; rich colors and photo-quality patterns are achieved in a single press

Analog / Blind OperationNo real-time parameter feedback; operators guess settings, so quality drifts batch to batch.

Output Speed & Throughput

CECLE HT-150High Durability: The transferred patterns offer excellent scratch resistance, wear resistance, and chemical resistance. Eco-Friendly & Efficient: Free of solvent pollution, easy to operate, with low defect rates

Slow Manual CyclingLoading and cycling depend on operator pace, limiting real throughput and raising labor cost.

Pressure Consistency

CECLE HT-150Uniform Transfer Pressure: The pneumatic head presses evenly across the whole transfer area, so the graphic releases cleanly with no patchy or missed spots.

Inconsistent Contact PressureForce drifts part to part, causing weak seals or incomplete transfer.

Operational Mechanism & Drive

CECLE HT-150Pneumatic Drive: Air-driven actuation gives a constant, operator-independent stroke, so pressure does not depend on who is running the machine.

Manual Lever OperationOutput depends on operator strength and drifts between shifts.

Technical Specifications

Specification	Value & Unit
Sht-B-300	Large Cylindrical (Swivel Type)

Compatible Applications & Materials

industrial products — primary target products for this Heat Transfer Machine line
Standard industrial materials compatible with the machine's rated spec range
B2B production lines and contract manufacturing workshops

Standard Operating Procedure (SOP)

Setup: connect the required power / air supply and verify the control display.
Parameter preset: set speed / temperature / pressure per the product spec.
Material loading: place the product in the correct fixture / mold slot.
Execution: start the cycle; monitor for stable, repeatable output.
Quality check: inspect the first units; adjust if deviation appears.
Safety & cooldown: use Emergency Stop on abnormality; allow cooldown before maintenance.

Engineering FAQ

What routine maintenance keeps the HT-150 stable for long production runs?
A: Keep the working area clean, verify the rated power/air supply before each shift, and inspect wear parts per the technical manual. Stable input conditions are the main factor in consistent output and long service life.

Which product sizes and formats can the HT-150 handle?
A: The machine is configured for its rated specification range (see Technical Specifications). For formats outside the standard range, CECLE can advise on tooling or model selection.