CECLE packaging machinery

FF2-ONE Nozzle Semi-Auto Machine for Filling (Pneumatic Drive)

$676.00 USD

Sale Sold out

Taxes included. Shipping calculated at checkout.

Size FF2-100 FF2-300 FF2-500 FF2-1000 FF2-2500 FF2-5000

Shipping methods by express to door(7-10 days) by sea to door including tax(25-40 days)

Quick Answer: The CECLE FF2-ONE semi-automatic Electric-Pneumatic Paste Filling.

CECLE FF2-ONE vs. Traditional / Generic Alternative

Where the CECLE FF2-ONE stands out against manual or generic machine — measured on the dimensions buyers care about most.

Operational Mechanism & Drive

CECLE FF2-ONEElectric-pneumatic integration (Pneumatic & Electric Integrated) is the biggest selling point of this series — the first five advantages below all center on it. Versatility (paste + liquid in one machine).

Manual Lever OperationOutput depends on operator strength and drifts between shifts.

Pressure Consistency

CECLE FF2-ONEStable 0.4–0.6 MPa Air Pressure: Pneumatic or servo-controlled force stays consistent across batches.

Inconsistent Spring/Manual PressureForce drifts with operator fatigue and batch size, causing weak seals and rejects.

Output Speed & Throughput

CECLE FF2-ONEIt is tuned for continuous commercial throughput with minimal idle time.

Slow Manual CyclingLoading and cycling depend on operator pace, capping real throughput and raising labor cost.

Chassis Rigidity & Vibration Resistance

CECLE FF2-ONEThe frame is built rigid to damp vibration and hold alignment under load.

Lightweight Sheet Metal ConstructionProne to chassis flex, frame warping over time, and seal leakage.

Technical Specifications

Parameter	FF2-50	FF2-100	FF2-300	FF2-500	FF2-1000	FF2-2500	FF2-3000	FF2-5000
Filling Range	5–50 ml	10–100 ml	30–300 ml	50–500 ml	100–1000 ml	250–2500 ml	300–3000 ml	500–5000 ml
Filling Speed	5–30 cycles/min	5–30 cycles/min	5–30 cycles/min	5–30 cycles/min	5–30 cycles/min	5–30 cycles/min	5–30 cycles/min	5–30 cycles/min
G.W. / N.W.	30/22 kg	30/22 kg	30/22 kg	30/22 kg	30/22 kg	40/32 kg	40/32 kg	30/22 kg
Packaging Dimension L×W×H	101×33×35 cm	101×33×35 cm	101×33×35 cm	101×33×35 cm	101×33×35 cm	120×40×39 cm	120×40×39 cm	101×33×35 cm

Customer Filling Format	Recommended Model	Customer Filling Format	Recommended Model
Sample-size cosmetic jars / vials (5–50 ml)	FF2-50	Large jars / bottles (100–1000 ml)	FF2-1000
Small jars / trial-size (10–100 ml)	FF2-100	Bucket-level (250–2500 ml)	FF2-2500
Regular cosmetic / food jars (30–300 ml)	FF2-300	Large pails / cans (300–3000 ml)	FF2-3000
Household-size jars / large bottles (50–500 ml)	FF2-500	Large pails / cans (500–5000 ml)	FF2-5000

No.	Model	Filling Range
1	FF2-50	5–50 ml
2	FF2-100	10–100 ml
3	FF2-300	30–300 ml
4	FF2-500	50–500 ml
5	FF2-1000	100–1000 ml
6	FF2-2500	250–2500 ml
7	FF2-3000	300–3000 ml
8	FF2-5000	500–5000 ml

Pre-installation requirements: Voltage: 220V / 50–60Hz; Power: Appro × . 100W (0.1 kW); Air Pressure: 0.4–0.6 MPa. External air compressor (3 HP / 2.2 kW or above) required.

Compatible Applications & Materials

industrial products — primary target products for this Machine line
Standard industrial materials compatible with the machine's rated spec range
B2B production lines and contract manufacturing workshops

Standard Operating Procedure (SOP)

Requirement confirmation: fill volume per cycle (ml), speed requirement, product type (paste / liquid / both) → drives model range and nozzle size
workshop power specification (220V/50–60Hz
other voltages to be confirmed with the factory), whether the customer already has an air compressor , and whether explosion-proof duty applies (if yes → switch to the FF6 fully-pneumatic paste-filling series)
Model recommendation: if paste (or paste + liquid) → recommend FF2-50 ~ FF2-5000 per the 4.1 table
if liquid-only → recommend the F2 series instead
for higher output, recommend a dual/4/6-head multi-head version
Supporting equipment check: confirm the power supply matches and the customer has an air compressor (0.4–0.6 MPa, with delivery volume covering the machine's air consumption) so the machine can run on arrival

Engineering FAQ

What power supply does the FF2-ONE require?
A: The FF2-ONE runs on 220V / 50–60Hz Voltage. Ensure the facility provides a stable supply at this rating; voltage mismatch can damage the drive or reduce performance.

What peripheral equipment should be prepared for the FF2-ONE?
A: Beyond the rated 220V / 50–60Hz Voltage supply, prepare the standard fixtures/molds for your product format and a clean, stable workbench. No special external compressor is required for this electric model.

What routine maintenance keeps the FF2-ONE stable for long production runs?
A: Keep the working area clean, verify the rated power/air supply before each shift, and inspect wear parts per the technical manual. Stable input conditions are the main factor in consistent output and long service life.

Which product sizes and formats can the FF2-ONE handle?
A: The machine is configured for its rated specification range (see Technical Specifications). For formats outside the standard range, CECLE can advise on tooling or model selection.