CECLE packaging machinery

F2-ELECTR Filler for Perfume Bottles & Liquids (Pneumatic Drive)

Name: F2-ELECTR
Brand: CECLE
Price: 325.0 USD
Availability: InStock

$424.00 USD

Sale Sold out

Taxes included. Shipping calculated at checkout.

Size F2-100 F2-300 F2-500 F2-1000 F2-2500 F2-5000

Shipping method by express(7-10 days) by sea to door(25-40 days)

Place of shipment shipping from China

Quick Answer: The CECLE F2-ELECTR semi-automatic Electric-Pneumatic Horizontal Liquid Filling.

CECLE F2-ELECTR vs. Traditional / Generic Alternative

Where the CECLE F2-ELECTR stands out against manual or generic filler — measured on the dimensions buyers care about most.

Operational Mechanism & Drive

CECLE F2-ELECTRElectric-pneumatic integration (Pneumatic & Electric Integrated) is the biggest selling point of this series — the first five advantages below all center on it. Electric-pneumatic drive — more precise.

Manual Lever OperationOutput depends on operator strength and drifts between shifts.

Pressure Consistency

CECLE F2-ELECTRStable 0.4–0.6 MPa Air Pressure: Pneumatic or servo-controlled force stays consistent across batches.

Inconsistent Spring/Manual PressureForce drifts with operator fatigue and batch size, causing weak seals and rejects.

Output Speed & Throughput

CECLE F2-ELECTRIt is tuned for continuous commercial throughput with minimal idle time.

Slow Manual CyclingLoading and cycling depend on operator pace, capping real throughput and raising labor cost.

Chassis Rigidity & Vibration Resistance

CECLE F2-ELECTRThe frame is built rigid to damp vibration and hold alignment under load.

Lightweight Sheet Metal ConstructionProne to chassis flex, frame warping over time, and seal leakage.

Technical Specifications

Parameter	F2-50	F2-100	F2-300	F2-500	F2-1000	F2-2500	F2-3000	F2-5000
Filling Range	5–50 ml	10–100 ml	30–300 ml	50–500 ml	100–1000 ml	250–2500 ml	300–3000 ml	500–5000 ml
Filling Speed	10–40 cycles/min	10–40 cycles/min	10–40 cycles/min	10–40 cycles/min	10–40 cycles/min	10–40 cycles/min	10–40 cycles/min	10–40 cycles/min
G.W. / N.W.	30/22 kg	30/22 kg	30/22 kg	30/22 kg	30/22 kg	40/32 kg	40/32 kg	30/22 kg
Packaging Dimension L×W×H	101×33×35 cm	101×33×35 cm	101×33×35 cm	101×33×35 cm	101×33×35 cm	120×40×39 cm	120×40×39 cm	101×33×35 cm

Customer Filling Format	Recommended Model	Customer Filling Format	Recommended Model
Sample packs / small vials (5–50 ml)	F2-50	Jug / large bottle (100–1000 ml)	F2-1000
Small trial-size bottles (10–100 ml)	F2-100	Gallon-level (250–2500 ml)	F2-2500
Regular bottles (30–300 ml)	F2-300	Large pail / can (300–3000 ml)	F2-3000
Household-size / large bottles (50–500 ml)	F2-500	Large pail / can (500–5000 ml)	F2-5000

No.	Model	Filling Range
1	F2-50	5–50 ml
2	F2-100	10–100 ml
3	F2-300	30–300 ml
4	F2-500	50–500 ml
5	F2-1000	100–1000 ml
6	F2-2500	250–2500 ml
7	F2-3000	300–3000 ml
8	F2-5000	500–5000 ml

Pre-installation requirements: Voltage: 220V / 50–60Hz; Power: Appro × . 100W (0.1 kW); Air Pressure: 0.4–0.6 MPa. External air compressor (3 HP / 2.2 kW or above) required.

Compatible Applications & Materials

industrial products — primary target products for this Filler line
Standard industrial materials compatible with the machine's rated spec range
B2B production lines and contract manufacturing workshops

Standard Operating Procedure (SOP)

Requirement confirmation: fill volume per cycle (ml), speed requirement, product characteristics (fluidity/corrosiveness → 304 or custom 316), workshop power specification (220V/50–60Hz
other voltages to be confirmed with the factory), whether the customer already has an air compressor , and whether explosion-proof duty applies (if yes → switch to the F6 fully-pneumatic series)
Model recommendation: recommend the matching F2-50 ~ F2-5000 model per the 4.1 table
recommend a dual/4/6-head multi-head version for higher output
Supporting equipment check: confirm the power supply matches and the customer has an air compressor (0.4–0.6 MPa, with delivery volume covering the machine's air consumption) so the machine can run on arrival
Lock technical details: material (304 / custom 316 ), nozzle orifice (3–12 mm), seals (silicone / corrosion-resistant rubber), number of filling heads (single / dual / 4 / 6), foot-pedal vs
Quotation &amp

Engineering FAQ

What power supply does the F2-ELECTR require?
A: The F2-ELECTR runs on 220V / 50–60Hz Voltage. Ensure the facility provides a stable supply at this rating; voltage mismatch can damage the drive or reduce performance.

What peripheral equipment should be prepared for the F2-ELECTR?
A: Beyond the rated 220V / 50–60Hz Voltage supply, prepare the standard fixtures/molds for your product format and a clean, stable workbench. No special external compressor is required for this electric model.

What routine maintenance keeps the F2-ELECTR stable for long production runs?
A: Keep the working area clean, verify the rated power/air supply before each shift, and inspect wear parts per the technical manual. Stable input conditions are the main factor in consistent output and long service life.

Which product sizes and formats can the F2-ELECTR handle?
A: The machine is configured for its rated specification range (see Technical Specifications). For formats outside the standard range, CECLE can advise on tooling or model selection.