CECLE Machine

Commercial Pneumatic Ginseng and Herb Slicer Machine

Name: Pneumatic Slicer
Brand: CECLE
Price: 6999.0 USD
Availability: InStock

$6,999.00 USD

Sale Sold out

Taxes included. Shipping calculated at checkout.

Mold XP-380

Configuration Need to equip more than 50l by oneself

Shipping method By sea to door about 45-55days

Quick Answer: The CECLE Manufacturing & Engineering Highlights.

CECLE vs. Traditional / Generic Alternative

Where the CECLE stands out against manual or generic pneumatic slicer — measured on the dimensions buyers care about most.

Pressure Consistency

CECLE The CECLE Pneumatic Slicer holds working pressure steady across batches, cutting weak-output rejects.

Inconsistent Contact PressureForce drifts part to part, causing weak seals or incomplete transfer.

Output Speed & Throughput

CECLE It is tuned for continuous commercial throughput with minimal idle time.

Slow Manual CyclingLoading and cycling depend on operator pace, capping real throughput and raising labor cost.

Operational Mechanism & Drive

CECLE Its drive removes operator-dependent variation, so output stays consistent.

Manual Lever OperationOutput depends on operator strength and drifts between shifts.

Chassis Rigidity & Vibration Resistance

CECLE The frame is built rigid to damp vibration and hold alignment under load.

Lightweight Sheet Metal ConstructionProne to chassis flex, frame warping over time, and seal leakage.

Technical Specifications

Parameter	Specification & Configuration	Remarks
Model	XP-380	Standard heavy-duty pneumatic slicer
Production Capacity	50 – 200 kg/h	Varies by material type, hardness & thickness
Slice Thickness Range	0.5 – 5 mm	Stepless micro-adjustment, high uniformity
Cutter Frequency	1,792 cuts/min (times/min)	Ultra-high-speed rotary disc, burr-free cuts
Total Motor Power	2.2 kW	Heavy-duty industrial pure copper motor
Overall Dimensions	1100 × 700 × 1140 mm	Compact vertical heavy-duty frame
Total Weight	180 kg	Solid cast & thick-plate structure, low vibration
Air Supply Requirement	User-equipped ≥50L air compressor required	Recommended pressure: 0.5 – 0.8 MPa
Construction Material	Heavy-Duty SUS304 Stainless Steel	Meets GMP and HACCP hygiene standards
Cutting Shapes	Willow-leaf (diagonal), oval, nail, round flat	Equipped with multi-angle guide molds
Applicable Materials	Medicinal root herbs (Ginseng, Astragalus, Gastrodia), root vegetables (Yam, Ginger, Lotus root)	Dual-use for medicinal and food processing
Global Logistics	By Sea to Door (DDP approx. 45–55 days)	Export-standard reinforced fumigation-free wooden case

Compatible Applications & Materials

industrial products — primary target products for this Pneumatic Slicer line
Standard industrial materials compatible with the machine's rated spec range
B2B production lines and contract manufacturing workshops

Standard Operating Procedure (SOP)

Setup: connect the required power / air supply and verify the control display.
Parameter preset: set speed / temperature / pressure per the product spec.
Material loading: place the product in the correct fixture / mold slot.
Execution: start the cycle; monitor for stable, repeatable output.
Quality check: inspect the first units; adjust if deviation appears.
Safety & cooldown: use Emergency Stop on abnormality; allow cooldown before maintenance.

Engineering FAQ

Why does the XP-380 require a customer-supplied ≥50L air compressor? What are the benefits over manual or mechanical feeding?
A: During high-speed slicing (1,792 cuts/min), raw materials experience intense cutting resistance. Manual feeding is uneven, causes vibration, and poses severe hand injury risks; mechanical gears lack adaptive buffering for varied root diameters. The XP-380 utilizes pneumatic cylinder pushing for uniform, constant, and cushioned feeding. This eliminates work hazards and guarantees slice uniformity. A ≥50L compressor ensures sustained working pressure (0.5–0.8 MPa) during continuous slicing without stalling.

Can the XP-380 cut extremely hard dried medicinal herbs? Will it chip blades or produce excessive powder?
A: The machine is purpose-built for root crops and herbs, utilizing cryogenic-treated wear-resistant alloy blades. Slicing properly conditioned/softened roots (e.g., Astragalus, American Ginseng, Angelica, Notoginseng) yields clean slices with scrap rates under 2%. For bone-dry, rock-hard materials, we strongly recommend pre-conditioning (steaming or moistening) per standard herbal processing practices to protect blade edges and minimize powdering loss.

How is the 0.5 – 5 mm thickness adjusted? Is it difficult?
A: Adjustment is fast and straightforward. The slicing mechanism features micro-metric adjustment bolts and scale markings without requiring disassembly of the entire disc. Simply loosen the locking handle, adjust to the desired thickness (from 0.5 mm paper-thin cuts up to 5 mm stewing cuts), retighten the lock, and resume production.

What routine maintenance keeps the stable for long production runs?
A: Keep the working area clean, verify the rated power/air supply before each shift, and inspect wear parts per the technical manual. Stable input conditions are the main factor in consistent output and long service life.

Which product sizes and formats can the handle?
A: The machine is configured for its rated specification range (see Technical Specifications). For formats outside the standard range, CECLE can advise on tooling or model selection.