CECLE packaging machinery

FF9 Filling Drive Machine for Pastes (Pneumatic Drive)

$1,200.00 USD

Sale Sold out

Taxes included. Shipping calculated at checkout.

Size FF9-100 FF9-50 FF9-300 FF9-500 FF9-1000 FF9-2500 FF9-5000

Shipping method by express to door without tax(7-10 days)

Place of shipment shipping from China

Quick Answer: The CECLE FF9 is a Capsule Filling Machine designed for Capsule Filling Machine with 30 L Hopper Capacity, engineered for stable, repeatable continuous, automated production.

CECLE FF9 vs. Traditional / Generic Alternative

Where the CECLE FF9 stands out against manual or generic machine — measured on the dimensions buyers care about most.

Operational Mechanism & Drive

CECLE FF9Premium Airtac Pneumatic Components : Equipped with Airtac pneumatic components, pneumatic + electric hybrid drive, requiring connection to an air compressor; simple operation with high filling accuracy. Full.

Manual Lever / Foot UnitsOutput depends on operator strength and drifts between shifts; no stable drive control.

Sealing / Transfer Quality

CECLE FF9Food-Grade High-Temperature Seals : Silicone O-rings withstand temperatures up to 100℃ and meet food safety standards; optional silicone or rubber seal rings, with rubber seals suitable for corrosive products

Uncontrolled Contact ConditionsEdges wrinkle, seals weaken or transfer is incomplete because pressure/heat are not synchronized.

Pressure Consistency

CECLE FF9Stable 0.4–0.6 MPa Air Pressure: Pneumatic or servo-controlled force stays consistent across batches.

Inconsistent Spring/Manual PressureForce drifts with operator fatigue and batch size, causing weak seals and rejects.

Output Speed & Throughput

CECLE FF9Rated 30 L Hopper Capacity: Built for steady commercial output with minimal idle time.

Slow Manual CyclingLoading and cycling depend on operator pace, capping real throughput and raising labor cost.

Technical Specifications

Specification	Value & Unit
Filling Range	50–500 ml
Hopper Capacity	30 L
Filling Nozzle	1 (Movable filling head)
Filling Speed	10–40 times/min
Filling Accuracy	≤1%
Air Consumption	0.55–1.1 m³/h
Air Pressure	0.4–0.6 MPa
Nozzle Diameter	3–12 mm (Optional)
G.W. / N.W.	35 / 30 kg
Packaging Dimension	95 × 45 × 40 + 46 × 44 × 47 cm
Unit Packaging	1 machine packed in 2 cases
Workflow Video	https://youtu.be/g3y × yeVzYCM

Media & Resources

Workflow Video: https://youtu.be/g3yXyeVzYCM

Pre-installation requirements: Air Pressure: 0.4–0.6 MPa; Packaging Dimension: 95 × 45 × 40 + 46 × 44 × 47 cm. External air compressor (3 HP / 2.2 kW or above) required.

Compatible Applications & Materials

industrial products — primary target products for this Machine line
Standard industrial materials compatible with the machine's rated spec range
B2B production lines and contract manufacturing workshops

Standard Operating Procedure (SOP)

flowchart LR A[Connect Air Compressor&lt
and Power Supply] --&gt
B[Set Filling Volume &amp
Speed] B --&gt
C{Select Operation Mode} C --&gt
|Semi-Automatic| D[Step on Foot Pedal&lt
Start Filling] C --&gt

Engineering FAQ

Why is the 10–40 times/min Filling Speed rating important for the FF9?
A: The 10–40 times/min Filling Speed balances throughput and stability for continuous B2B runs — too low limits output, too high compromises seal/transfer quality. This rating is the engineered sweet spot for the target product range.

Does the FF9 need an external air compressor?
A: Yes. The FF9 is pneumatically driven and requires a stable external air supply at the specified pressure. CECLE recommends a compressor sized for continuous duty to hold stable output.

What routine maintenance keeps the FF9 stable for long production runs?
A: Keep the working area clean, verify the rated power/air supply before each shift, and inspect wear parts per the technical manual. Stable input conditions are the main factor in consistent output and long service life.

Which product sizes and formats can the FF9 handle?
A: The machine is configured for its rated specification range (see Technical Specifications). For formats outside the standard range, CECLE can advise on tooling or model selection.