CECLE Machine

SHS-10 Seals Serial Number Stamping Printing for Foil Pouches (Pneumatic Drive)

$3,900.00 USD

Sale Sold out

Taxes included. Shipping calculated at checkout.

Model SHS-10 Serial Number Hot Foil Stamping Machine

Shipping Methods By Sea Shipping+Truck Delivery To Door(25-40 Days After Departure) By Air Shipping+Truck Delivery To Door(10-15 Days After Departure)

Shipping From China

Quick Answer: The CECLE SHS-10 related machines: chsp-200-car-lisence-hot-stamping-machine · dgp-210-desktop-hot-stamping-machine · hsb-4025-bag-hot-stamping-machine · hsr-p-2126-ribbon-roll-hot-stamping-machine ·.

CECLE SHS-10 vs. Traditional / Generic Alternative

Where the CECLE SHS-10 stands out against manual or generic printing — measured on the dimensions buyers care about most.

Output Speed & Throughput

CECLE SHS-10High-Efficiency Batch Processing : Specially designed to handle multiple plastic seals simultaneously (usually 10 pieces per cycle), dramatically boosting daily production output compared to single-piece stamping

Slow Manual CyclingLoading and cycling depend on operator pace, capping real throughput and raising labor cost.

Operational Mechanism & Drive

CECLE SHS-10Dual-Head Simultaneous Stamping : Equipped with two distinct stamping heads—one dedicated to custom logo dies and the other to automatic numbering machines—enabling pattern and serial number stamping in one single press

Manual Lever OperationOutput depends on operator strength and drifts between shifts.

Sealing / Transfer Quality

CECLE SHS-10Fully Customizable Tooling : Molds are precisely custom-built according to the client's specific seal samples, and numbering machines can be tailored to meet unique serialization and digit requirements

Uncontrolled Contact ConditionsEdges wrinkle, seals weaken or transfer is incomplete because pressure/heat are not synchronized.

Pressure Consistency

CECLE SHS-10Flexible Dual Operation Modes : Supports both pneumatic push-button control and a convenient foot switch, allowing operators to work with maximum ergonomic comfort and speed. Compact, Reliable & Easy Setup.

Inconsistent Contact PressureForce drifts part to part, causing weak seals or incomplete transfer.

Technical Specifications

Dimension	CECLE Solution	Traditional / Generic
Heads	Dual head: logo die + auto numbering at once.	Single-head needs two passes.
Batch	~10 seals per cycle, sequential numbers.	Manual numbering is slow, error-prone.
Speed	20-30 times/min pneumatic/foot control.	Hand stamping cannot keep pace.
Use	Security seals, logistics tags, anti-counterfeit.	General presses lack seal tooling.
Build	Pneumatic, custom mold matched.	Fixed dies cannot serialize.

Parameter Name	Specification
Model	SHS-10
Stamping head	2 heads (one for numbering machine, another one for hot stamping die)
Speed	20–30 times/min
Power	2 kW
Voltage	220V 50–60Hz single phase
Applicable material	Hot stamping foil
Hot stamping products	Flat Products For Serial Number printing (Plastic Seals)
G.W.	150 kg / 330 lbs
Packaging dimension	650 × 550 × 1450 mm / 25.6" × 21.6" × 57"

Pre-installation requirements: Power: 2 kW; Voltage: 220V 50–60Hz single phase; Packaging Dimension: 650 × 550 × 1450 mm / 25.6" × 21.6" × 57".

Compatible Applications & Materials

industrial products — primary target products for this Printing line
Standard industrial materials compatible with the machine's rated spec range
B2B production lines and contract manufacturing workshops

Standard Operating Procedure (SOP)

Power Connection : Connect the machine to an external air compressor and plug into a 220V single-phase power source
Foil Setup : Ensure the custom seal mold and dual stamping heads (numbering machine + logo die) are securely installed, and thread the hot stamping foil through the path
Seal Placement : Place a batch of plastic seals (typically 10 pieces) neatly into the dedicated custom mold on the worktable
Pneumatic Stamping : Press the pneumatic push button or step on the foot switch to trigger the automated stamping cycle
The dual heads descend to imprint both the logo and sequential numbers crisply onto the seals using the foil
Collection &amp
Inspection : Retrieve the finished batch of serialized plastic seals, inspect the imprint clarity, and proceed with packaging.

Engineering FAQ

What is this machine specifically used for?
A: The SHS-10 is custom-engineered for hot stamping logos and sequential serial numbers onto plastic security seals (typically processing around 10 seals simultaneously per batch).

Can it stamp logos and serial numbers at the same time?
A: Yes! It features a dual-head design—one head is for your custom logo stamping die, and the other is for the automated numbering machine, allowing both to be stamped in a single operation.

What preparations are needed after receiving the machine?
A: Upon receiving the machine, connect it to the proper single-phase power supply (220V) and link it to an external air compressor to supply air pressure for the pneumatic system.

Why is the 20–30 times/min Speed rating important for the SHS-10?
A: The 20–30 times/min Speed balances throughput and stability for continuous B2B runs — too low limits output, too high compromises seal/transfer quality. This rating is the engineered sweet spot for the target product range.

What peripheral equipment should be prepared for the SHS-10?
A: Beyond the rated 220V 50–60Hz single phase Voltage supply, prepare the standard fixtures/molds for your product format and a clean, stable workbench. No special external compressor is required for this electric model.

What routine maintenance keeps the SHS-10 stable for long production runs?
A: Keep the working area clean, verify the rated power/air supply before each shift, and inspect wear parts per the technical manual. Stable input conditions are the main factor in consistent output and long service life.