CECLE packaging machinery

ALS-1 Labeling Machine for Flat Boxes & Essential Oil Bottles (Automatic)

$6,000.00 USD

Sale Sold out

Taxes included. Shipping calculated at checkout.

Model ALF-1 Top labeling machine ALS-1 Side labeling machine

Shipping Method By Air Shipping+Truck Delivery To Door(10-15 Days After Departure) By Sea Shipping+Truck Delivery To Door(25-40 Days After Departure)

Shipping From China

Quick Answer: The CECLE ALS-1 is an automatic inline labeling machine for flat boxes and small essential-oil bottles. It drops into an existing assembly line and labels cartons or small flat containers as they pass through.

CECLE ALS-1 vs. Traditional / Generic Alternative

Where this CECLE machine stands out against manual or generic alternatives — measured on the dimensions buyers care about most.

Pressure Consistency

CECLE ALS-1Consistent Contact Pressure: The applicator presses every label with the same force, so labels sit flat with no wrinkles or air bubbles.

Inconsistent Contact PressureForce drifts part to part, causing weak adhesion, wrinkled labels or misalignment.

Output Speed & Throughput

CECLE ALS-1Continuous Automatic Feed: The conveyor and label feed run continuously, so throughput is set by belt speed rather than operator pace.

Slow Manual CyclingLoading and cycling depend on operator pace, limiting real throughput and raising labor cost.

Operational Mechanism & Drive

CECLE ALS-1Synchronised Label Feed: A motor-driven dispensing head keeps label peel timing matched to product spacing, so placement does not drift.

Manual Lever OperationOutput depends on operator strength and drifts between shifts.

Chassis Rigidity & Vibration Resistance

CECLE ALS-1Rigid Frame, Aligned Axes: A stiff frame keeps conveyor and applicator on the same axis, so label position holds steady across a shift.

Lightweight Sheet Metal ConstructionProne to chassis flex, frame warping over time, and drifting label placement.

Technical Specifications

Specification	Value & Unit
Model Series	Automation Level

Compatible Applications & Materials

industrial products — primary target products for this Labeling Machine line
Standard industrial materials compatible with the machine's rated spec range
B2B production lines and contract manufacturing workshops

Standard Operating Procedure (SOP)

Setup: connect the required power / air supply and verify the control display.
Parameter preset: set speed / temperature / pressure per the product spec.
Material loading: place the product in the correct fixture / mold slot.
Execution: start the cycle; monitor for stable, repeatable output.
Quality check: inspect the first units; adjust if deviation appears.
Safety & cooldown: use Emergency Stop on abnormality; allow cooldown before maintenance.

Engineering FAQ

What routine maintenance keeps the ALS-1 stable for long production runs?
A: Keep the working area clean, verify the rated power/air supply before each shift, and inspect wear parts per the technical manual. Stable input conditions are the main factor in consistent output and long service life.

Which product sizes and formats can the ALS-1 handle?
A: The machine is configured for its rated specification range (see Technical Specifications). For formats outside the standard range, CECLE can advise on tooling or model selection.