CECLE packaging machinery
AF-1600D Aerosol Filling Machine for Butane Gas Canisters (Automatic)
AF-1600D Aerosol Filling Machine for Butane Gas Canisters (Automatic)
Couldn't load pickup availability
CECLE AF-1600D vs. Traditional / Generic Alternative
Where the CECLE AF-1600D stands out against manual or generic aerosol filling machines — measured on the dimensions buyers care about most.
Technical Specifications
| Function | Description |
|---|---|
| Vacuum evacuation | One vacuum station removes air from the can to prepare for metered gas filling |
| Valve crimping | One crimping machine crimps the 1-inch aerosol valve |
| Gas filling | Two gas fillers (dual filling units) meter the fuel gas or propellant at 150–300 g with repeat accuracy ≤±1% |
| Booster air supply | Two booster pumps deliver stable, dual-channel pressurised supply for simultaneous filling at both stations |
| Water bath leak testing | One matching semi-automatic water bath leak detector (with temperature control) for finished-can leak testing |
| Parameter | Specification |
|---|---|
| Single-Head Gas Filling Speed | 3000–4000 cans/day |
| Gas Filling Weight | 150–300 g |
| Repeat Filling Accuracy | ≤±1% |
| Applicable Can Diameter | 35–65 mm (customizied) |
| Applicable Can Height | 70–330 mm (customizied) |
| Available Valve | 1" (25.4 mm) |
| Air Source Pressure | 0.8–1.2 MPa |
| Max Air Consumption | 0.8 m³/min at 0.6 MPa |
| Station Configuration | Vacuum evacuation ×1, crimping machine ×1, gas filler ×2, booster pump ×2 |
| Auxiliary Equipment | Semi-automatic water bath leak detector ×1 (with temperature control) |
| Filling Medium | Gas (fuel gas / propellant). This machine has no liquid filling station |
Media & Resources
Resource:
Pre-installation requirements: Gas Filling Weight: 150–300 g. External air compressor (3 HP / 2.2 kW or above) required.
Compatible Applications & Materials
- industrial products — primary target products for this Aerosol Filling Machine line
- Standard industrial materials compatible with the machine's rated spec range
- B2B production lines and contract manufacturing workshops
Standard Operating Procedure (SOP)
- Semi-automatic sequence (manual can loading, stations in series): Operator loads an empty can ↓ ① Vacuum evacuation station — air is drawn out of the can ↓ ② Valve crimping station — the 1"
- aerosol valve is crimped in place ↓ ③ Gas filling station ×2 — metered fuel gas / propellant fill (150–300 g, accuracy ≤±1%) ↓ ④ Semi-automatic water bath test — temperature-controlled water bath leak testing (dedicated detector included) ↓ Operator removes the finished can Station order follows the equipment list in the factory quotation (vacuum evacuation → valve crimping → gas filling → water bath testing)
- the actual on-site sequence should follow the factory SOP
- Air circuit: gas source (butane / LPG / DME, etc.) → booster pump ×2 → gas filling station ×
- The twin booster pumps hold both filling lines steady at 0.8–1.2 MPa, keeping parallel filling smoother and safer
- Power/air supply: compressed air source pressure 0.8–1.2 MPa, max air consumption 0.8 m³/min at 0.6 MPa.
Engineering FAQ
Which operations does this machine perform, and what does the operator do?
A: AF-1600D handles vacuum evacuation, valve crimping and gas filling, all machine-driven. The operator only loads and unloads cans. A semi-automatic water bath leak detector is also supplied for finished-can leak testing.
Can it fill liquids?
A: No. AF-1600D is a gas filling machine for fuel gas or propellant only. The specification table lists a gas fill weight of 150–300 g and no liquid filling station. Customers who need liquid filling as well should look at four-station machines such as the AF4-1600A.
What are the gas fill weight and accuracy?
A: Gas fill weight is 150–300 g, with repeat filling accuracy ≤±1%.
How should output be calculated?
A: The specification table gives the per-head rate of 3000–4000 cans per day. This machine has twin filling units, and actual daily output is limited by how fast the operator loads and unloads cans and by the leak testing rhythm. Confirm the figure with the factory before quoting it to a customer.
Which can types and valves does it fit?
A: It fits tinplate and aluminium aerosol cans with the international standard 1-inch (25.4 mm) can opening, can diameter 35–65 mm and can height 70–330 mm. Sizes outside this range can be customised.
What are the air supply requirements?
A: Air source pressure 0.8–1.2 MPa with maximum air consumption of 0.8 m³/min at 0.6 MPa. The machine comes with two booster pumps to keep the supply stable.
Full Documentation & Drawings
Complete technical manual, parameters and engineering drawings: CECLE Docs — AF-1600D
Related CECLE Machines
Request a Quote
Send your product specifications, target output and format details to CECLE for a tailored configuration, lead time and factory-direct quotation.
Share
