CECLE Machine

TD-043H Double-Station Up-Slide Heat Press Machine for T-Shirts & Garments (Hydraulic)

Name: TD-043H
Brand: CECLE
Price: 2799.0 USD
Availability: InStock

$2,799.00 USD

Sale Sold out

Taxes included. Shipping calculated at checkout.

Model TD-043H

Shipping Method By sea to door(About 35-55 days)

Quick Answer: The CECLE TD-043H is an up-slide double-station hydraulic heat press machine designed for high-volume sublimation transfer onto garments and T-shirts.

CECLE TD-043H vs. Traditional / Generic Alternative

Where the CECLE TD-043H stands out against manual or generic heat press machines — measured on the dimensions buyers care about most.

Pressure Consistency

CECLE TD-043HDual-Station Efficiency : Slide the upper heating plate over two worktables via the moving handle; while the operator loads/unloads one side, the other is prepared simultaneously—far more efficient than.

Inconsistent Contact PressureForce drifts part to part, causing weak seals or incomplete transfer.

Thermal Response & Heating System

CECLE TD-043HEmergency Stop Protection : Equipped with an emergency stop button that immediately cuts motion and lifts the heating plate in emergencies, protecting personnel and equipment

Single Fixed HeatingUses cheap quartz tubes with slow preheating, uneven heat distribution, and frequent element burnouts.

Output Speed & Throughput

CECLE TD-043HIt is tuned for continuous commercial throughput with minimal idle time.

Slow Manual CyclingLoading and cycling depend on operator pace, limiting real throughput and raising labor cost.

Operational Mechanism & Drive

CECLE TD-043HPurpose-Built Power: 3500W drive delivers steady, operator-independent output.

Manual Lever OperationOutput depends on operator strength and drifts between shifts.

Technical Specifications

Items	Specifications
Model	TD-043H
Heat Platen Size	40CM×60CM/15.8×23.6"
Power	3500W
Voltage	110V/220V
Temperature Range	0-399°C
Time Range	0-999 S
Packaging Dimension	116×94×84CM/45.7×37×33.1"
Gross Weight	224KG/494LB

Pre-installation requirements: Power: 3500W; Voltage: 110V/220V; Packaging Dimension: 116×94×84CM/45.7×37×33.1"; Gross Weight: 224KG/494LB.

Compatible Applications & Materials

industrial products — primary target products for this Heat Press Machine line
Standard industrial materials compatible with the machine's rated spec range
B2B production lines and contract manufacturing workshops

Standard Operating Procedure (SOP)

Power on and check oil : Connect the 220V power, confirm the hydraulic oil is filled to the standard level, and turn on the power switch
Parameter Setting : Set temperature: press ▲ to increase, ▼ to decrease
Set time: press ▲ to increase, ▼ to decrease
Once set, the machine begins to heat up
Preheat : Wait for the machine to heat up to the target temperature
Place the workpiece and switch stations : The machine alarms when the set temperature is reached
Hold the moving handle below the control panel and slide the upper heating-plate assembly along the top rail directly above the target station

Engineering FAQ

Does this machine require an air compressor?
A: No. The TD-043H is a hydraulic model with a built-in hydraulic system; it only needs hydraulic oil and a 220V power connection to work, eliminating the purchase, air-hose routing, and daily maintenance of an air compressor.

How does the dual-station design improve efficiency?
A: The machine has two fixed stations; the upper heating plate is slid between left and right stations via the moving handle. While one side is pressing, the operator can simultaneously load material or take finished products on the other side, reducing idle waiting.

What is the difference from the pneumatic TD-043?
A: The core difference is the drive method—the TD-043H is hydraulically driven, with greater, more stable pressure and no air compressor needed, while the TD-043 is pneumatic and requires an air compressor. Both share the same 40×60 cm up-slide dual-station structure.

What power supply does the TD-043H require?
A: The TD-043H runs on 3500W Power. Ensure the facility provides a stable supply at this rating; voltage mismatch can damage the drive or reduce performance.

What peripheral equipment should be prepared for the TD-043H?
A: Beyond the rated 110V/220V Voltage supply, prepare the standard fixtures/molds for your product format and a clean, stable workbench. No special external compressor is required for this electric model.

What routine maintenance keeps the TD-043H stable for long production runs?
A: Keep the working area clean, verify the rated power/air supply before each shift, and inspect wear parts per the technical manual. Stable input conditions are the main factor in consistent output and long service life.