Skip to product information
1 of 4

CECLE Machine

1325 CO2 Laser Cutting Machine for Acrylic Sheets & Signs (150W Water-Cooled)

1325 CO2 Laser Cutting Machine for Acrylic Sheets & Signs (150W Water-Cooled)

Regular price $10,500.00 USD
Regular price Sale price $10,500.00 USD
Sale Sold out
Taxes included. Shipping calculated at checkout.
Model
Power
Shipping Method
Quantity
Quick Answer: The CECLE 1325 is a CO2 Laser Cutting Machine with an engraving speed of 1 – 1000 mm/s, engineered for stable, repeatable commercial-scale production.

CECLE 1325 vs. Traditional / Generic Alternative

Where the CECLE 1325 stands out against generic co2 laser cutting machines — measured on the dimensions buyers care about most.

Working Area & Sheet Capacity
CECLE 13251300mm × 2500mm bed takes a full 4ft × 8ft sheet in one pass, so large signage comes out as one piece with no joints.
Small Fixed Bedanything past the bed is cut in sections and rejoined, and the seam shows on the finished panel.
Cut Edge on Acrylic
CECLE 1325150W water-cooled tube cuts 20mm+ acrylic with a clean vertical edge that comes off flame-polished, so no secondary polishing step.
Low-Power Air-Cooled Tubecuts are slow and leave a frosted, chipped edge that has to be flame-polished by hand.
Loading & Handling
CECLE 1325Open flatbed with full-access loading takes oversized sheets by forklift, suction lifter or overhead crane, with no enclosure opening to pass through.
Enclosed Cabinetmaterial has to be fed through a fixed opening, so oversize sheets simply do not fit.
Motion & Repeatability
CECLE 1325XY 3-wire 15 linear guides with reinforced belts and Ruida DSP control hold ≤ ±0.01 mm repeatability across the full 2.5 m bed.
Belt-Only Gantry, No DSPaccuracy drifts toward the far end of a long bed, so long jobs have to be re-homed mid-run.

Technical Specifications

Parameter Specification
Model 1325
Laser Type CO2 laser tube, water-cooled
Laser Power 150W
Working Area 1300mm × 2500mm
Engraving Speed 1 – 1000 mm/s
Cutting Speed 1 – 300 mm/s
Repeating Location ≤ ±0.01 mm
Transmission Type Belt transmission
Guide Rail XY 3-wire 15 linear guide
Graphic Format Supported BMP, HPGL(PLT), JPEG, DXF, AI, DST
Software Supported CorelDraw, AutoCAD, Photoshop, Tajima
Control System Ruida USB (Off-line) control system
Water Temperature 5°C – 35°C
Working Voltage 220V 50Hz
Cutting Thickness 0 – 20 mm (Depending on material properties)
Characteristic 256 color layered output / 180-degree Slope Sculpture
Machine Dimensions / Weight 320 × 201 × 114 cm / 760 KG
Packing Dimensions / Weight 330 × 215 × 130 cm / 840 KG

Pre-installation requirements: Laser Power: 150W; Working Voltage: 220V 50Hz; Machine Dimensions / Weight: 320 × 201 × 114 cm / 760 KG; Packing Dimensions / Weight: 330 × 215 × 130 cm / 840 KG.

Compatible Applications & Materials

  • industrial products — primary target products for this CO2 Laser Cutting Machine line
  • Standard industrial materials compatible with the machine's rated spec range
  • B2B production lines and contract manufacturing workshops

Standard Operating Procedure (SOP)

  1. Setup: connect power at the rated voltage (220V 50Hz) and verify the control display.
  2. Parameter preset: set speed / temperature / pressure per the product spec.
  3. Material loading: place the product in the correct fixture / mold slot.
  4. Execution: start the cycle; monitor for stable, repeatable output.
  5. Quality check: inspect the first units; adjust if deviation appears.
  6. Safety & cooldown: use Emergency Stop on abnormality; allow cooldown before maintenance.

Engineering FAQ

Can this machine handle full-size 4ft × 8ft panels directly?
A: Yes. The working table measures 1300mm × 2500mm, providing clearance for standard 4ft × 8ft (1220mm × 2440mm) sheets without edge trimming.

What safety precautions are recommended for the open flatbed design?
A: Because there is no top cover, operators should wear certified CO2 laser safety goggles, keep clear boundary walkways around the perimeter, and use dedicated fume extraction hoods.

What is the maximum cutting thickness of the 150W laser on acrylic?
A: The 150W tube cuts acrylic up to 20mm with consistent edge verticality. Clean cuts above 20mm are achievable with optimal focus calibration and controlled feed rates.

Why is the 1 – 1000 mm/s Engraving Speed rating important for the 1325?
A: The 1 – 1000 mm/s Engraving Speed balances throughput and stability for continuous B2B runs — too low limits output, too high compromises seal/transfer quality. This rating is the engineered sweet spot for the target product range.

What peripheral equipment should be prepared for the 1325?
A: Beyond the rated 220V 50Hz Working Voltage supply, prepare the standard fixtures/molds for your product format and a clean, stable workbench. No special external compressor is required for this electric model.

What routine maintenance keeps the 1325 stable for long production runs?
A: Keep the working area clean, verify the rated power/air supply before each shift, and inspect wear parts per the technical manual. Stable input conditions are the main factor in consistent output and long service life.

Full Documentation & Drawings

Complete technical manual, parameters and engineering drawings: CECLE Docs — 1325

Related CECLE Machines

Request a Quote

Send your product specifications, target output and format details to CECLE for a tailored configuration, lead time and factory-direct quotation.

View full details