CECLE packaging machinery

Acrylic 100 holes Capsule Filling Machine 000#00#0#1#2#3#4# Filer Tray

$79.99 USD

~~$99.00 USD~~ $79.99 USD

Sale Sold out

Taxes included. Shipping calculated at checkout.

Size 000# 00# 0# 1# 2# 3# 4# 5#

Shipping method by express to door(7-15days)

Quick Answer: The CECLE Choose the tier that best describes your.

CECLE vs. Traditional / Generic Alternative

Aspect	CECLE (This Machine)	Traditional / Generic Alternative
Pressure Consistency	: Engineered for this aspect to deliver stable B2B performance.	Inconsistent Contact Pressure: Force drifts part to part, causing weak seals or incomplete transfer.
Output Speed & Throughput	: Engineered for this aspect to deliver stable B2B performance.	Slow Manual Cycling: Loading and cycling depend on operator pace, capping real throughput and raising labor cost.
Operational Mechanism & Drive	Purpose-Built Total Power: 4.00 kW drive delivers steady, operator-independent output.	Manual Lever Operation: Output depends on operator strength and drifts between shifts.
Chassis Rigidity & Vibration Resistance	Industrial-Reinforced Frame: 469 kg Weight chassis eliminates vibration and keeps seals tight.	Lightweight Sheet Metal (<230 kg): Prone to chassis flex, frame warping over time, and seal leakage.

Technical Specifications

Specification	Value & Unit
Hourly Output	10,000 – 30,000 capsules/hour
Capsule Sizes	000# – 4#
Standard Material	304 Stainless Steel
Upgrade Option	316 Stainless Steel (material-contact parts)
Total Power	4.00 kW
Net Weight	469 kg (1034.0 lb)
Dimensions	1490 × 723 × 1610 mm (58.7 × 28.5 × 63.4 in)
Mold Change Time	5 – 8 minutes
Capsule Separation Rate	100%
Production Lead Time	33 days
Njp-200	200
Njp-400	400
Njp-800	800
Njp-1200	1,200
Njp-2500	2,500
Your Situation	Recommended Model
Vacuum Feeder	CGN-208D, NJP Series
Capsule Polishing Machine	CGN-208D, NJP Series
Capsule Sorting Machine	CGN-208D, NJP Series
Capsule Counting Machine	CGN-208D, NJP Series
304 / Sus304 Stainless Steel	316 / SUS316L Stainless Steel
Production Target	Recommendation
10,000 – 30,000 Per Hour	→ CGN-208D Semi-Automatic Machine
Manual Capsule Filling Board	View Details & Inquire

Pre-installation requirements: Total Power: 4.00 kW; Net Weight: 469 kg (1034.0 lb); Dimensions: 1490 × 723 × 1610 mm (58.7 × 28.5 × 63.4 in).

Compatible Applications & Materials

industrial products — primary target products for this packaging line
Standard industrial materials compatible with the machine's rated spec range
B2B production lines and contract manufacturing workshops

Standard Operating Procedure (SOP)

Setup: connect the required power / air supply and verify the control display.
Parameter preset: set speed / temperature / pressure per the product spec.
Material loading: place the product in the correct fixture / mold slot.
Execution: start the cycle; monitor for stable, repeatable output.
Quality check: inspect the first units; adjust if deviation appears.
Safety & cooldown: use Emergency Stop on abnormality; allow cooldown before maintenance.

Engineering FAQ

What power supply does the require?
A: The runs on 4.00 kW Total Power. Ensure the facility provides a stable supply at this rating; voltage mismatch can damage the drive or reduce performance.

What routine maintenance keeps the stable for long production runs?
A: Keep the working area clean, verify the rated power/air supply before each shift, and inspect wear parts per the technical manual. Stable input conditions are the main factor in consistent output and long service life.

Which product sizes and formats can the handle?
A: The machine is configured for its rated specification range (see Technical Specifications). For formats outside the standard range, CECLE can advise on tooling or model selection.