CECLE packaging machinery

100 Holes Capsule Filling Tray for Size 0# Capsules

$59.99 USD

~~$59.99 USD~~ $59.99 USD

Sale Sold out

Taxes included. Shipping calculated at checkout.

Shipping method by express to door(7-15days)

Notice If your destination is the USA we need you to obtain DEA (Drug Enforcement Administration) permission before we can send the machine

Size 000# 00# 0# 1# 2# 3#

Quick Answer: The CECLE 100-hole capsule filling tray is a manual plate tool for size 0# capsules. It fills a full 100-capsule batch in one pass with no power or air supply required.

CECLE Capsule Filling Tray vs. Traditional / Generic Alternative

Aspect	CECLE Capsule Filling Tray (This Machine)	Traditional / Generic Alternative
Pressure Consistency	Uniform Cavity Depth: Every cavity in the plate is cut to the same depth, so each capsule body seats flat and fills to an identical level across the whole tray.	Inconsistent Contact Pressure: Force drifts part to part, causing weak adhesion, uneven fill levels and spilled powder.
Output Speed & Throughput	Whole-Batch Filling: One pass fills the entire tray at once, so output scales with how many plates an operator runs rather than with a machine cycle.	Slow Manual Cycling: Loading and cycling depend on operator pace, limiting real throughput and raising labor cost.
Operational Mechanism & Drive	Purely Manual Tool: No power, air or wiring required, so the tray works on any bench and has nothing electrical to fail or maintain.	Manual Lever Operation: Output depends on operator strength and drifts between shifts.
Chassis Rigidity & Vibration Resistance	Rigid One-Piece Plate: A solid, warp-resistant plate keeps the cavity grid aligned after repeated filling, washing and sterilising.	Lightweight Sheet Metal (<230 kg): Prone to chassis flex, frame warping over time, and inconsistent capsule seating.

Technical Specifications

Specification	Value & Unit
Hourly Output	10,000 – 30,000 capsules/hour
Capsule Sizes	000# – 4#
Standard Material	304 Stainless Steel
Upgrade Option	316 Stainless Steel (material-contact parts)
Total Power	4.00 kW
Net Weight	469 kg (1034.0 lb)
Dimensions	1490 × 723 × 1610 mm (58.7 × 28.5 × 63.4 in)
Mold Change Time	5 – 8 minutes
Capsule Separation Rate	100%
Production Lead Time	33 days
Njp-200	200
Njp-400	400
Njp-800	800
Njp-1200	1,200
Njp-2500	2,500
Your Situation	Recommended Model
Vacuum Feeder	CGN-208D, NJP Series
Capsule Polishing Machine	CGN-208D, NJP Series
Capsule Sorting Machine	CGN-208D, NJP Series
Capsule Counting Machine	CGN-208D, NJP Series
304 / Sus304 Stainless Steel	316 / SUS316L Stainless Steel
Production Target	Recommendation
10,000 – 30,000 Per Hour	→ CGN-208D Semi-Automatic Machine
Manual Capsule Filling Board	View Details & Inquire

Pre-installation requirements: Total Power: 4.00 kW; Net Weight: 469 kg (1034.0 lb); Dimensions: 1490 × 723 × 1610 mm (58.7 × 28.5 × 63.4 in).

Compatible Applications & Materials

industrial products — primary target products for this packaging line
Standard industrial materials compatible with the machine's rated spec range
B2B production lines and contract manufacturing workshops

Standard Operating Procedure (SOP)

Setup: connect the required power / air supply and verify the control display.
Parameter preset: set speed / temperature / pressure per the product spec.
Material loading: place the product in the correct fixture / mold slot.
Execution: start the cycle; monitor for stable, repeatable output.
Quality check: inspect the first units; adjust if deviation appears.
Safety & cooldown: use Emergency Stop on abnormality; allow cooldown before maintenance.

Engineering FAQ

What routine maintenance keeps the Capsule Filling Tray stable for long production runs?
A: Keep the working area clean, verify the rated power/air supply before each shift, and inspect wear parts per the technical manual. Stable input conditions are the main factor in consistent output and long service life.

Which product sizes and formats can the Capsule Filling Tray handle?
A: The machine is configured for its rated specification range (see Technical Specifications). For formats outside the standard range, CECLE can advise on tooling or model selection.