CECLE packaging machinery

TSP-187 Capsule Filling Machine for Caps (Industrial Grade)

$2,500.00 USD

Sale Sold out

Taxes included. Shipping calculated at checkout.

Size 000# 00# 0# 1# 2# 3# 4# 5#

Shipping method By sea to port

Quick Answer: The CECLE TSP-187 is a manual capsule filling machine that fills 187 capsules per cycle. Capsule bodies sit in a fixed plate so each one is tamped to the same depth, giving small-batch and clinical production a repeatable fill weight without automation.

CECLE TSP-187 vs. Traditional / Generic Alternative

Where the TSP-187 stands out against manual or generic alternatives — measured on the dimensions buyers care about most.

Pressure Consistency

CECLE TSP-187Even Powder Packing: Capsule bodies sit in a fixed plate, so each one is tamped to the same depth and ends up with the same fill weight.

Inconsistent Contact PressureForce drifts part to part, causing weak adhesion, fill-weight variation and rejected capsules.

Output Speed & Throughput

CECLE TSP-187187 Capsules per Cycle: Each pass fills a full 187-capsule batch, which is a practical daily output for small-batch, clinic and trial production without automation.

Slow Manual CyclingLoading and cycling depend on operator pace, limiting real throughput and raising labor cost.

Operational Mechanism & Drive

CECLE TSP-187Manual, Power-Free Cycle: The stroke is driven by hand, so there is no motor, air line or control electronics to maintain.

Manual Lever OperationOutput depends on operator strength and drifts between shifts.

Chassis Rigidity & Vibration Resistance

CECLE TSP-187Solid Bench Body: A stiff, low-vibration body keeps the capsule plates aligned, so bodies and caps mate without crushing or mis-seating.

Lightweight Sheet Metal (<230 kg)Prone to chassis flex, frame warping over time, and drifting plate alignment.

Technical Specifications

Specification	Value & Unit
Hourly Output	10,000 – 30,000 capsules/hour
Capsule Sizes	000# – 4#
Standard Material	304 Stainless Steel
Upgrade Option	316 Stainless Steel (material-contact parts)
Total Power	4.00 kW
Net Weight	469 kg (1034.0 lb)
Dimensions	1490 × 723 × 1610 mm (58.7 × 28.5 × 63.4 in)
Mold Change Time	5 – 8 minutes
Capsule Separation Rate	100%
Production Lead Time	33 days
Njp-200	200
Njp-400	400
Njp-800	800
Njp-1200	1,200
Njp-2500	2,500
Your Situation	Recommended Model
Vacuum Feeder	CGN-208D, NJP Series
Capsule Polishing Machine	CGN-208D, NJP Series
Capsule Sorting Machine	CGN-208D, NJP Series
Capsule Counting Machine	CGN-208D, NJP Series
304 / Sus304 Stainless Steel	316 / SUS316L Stainless Steel
Production Target	Recommendation
10,000 – 30,000 Per Hour	→ CGN-208D Semi-Automatic Machine
Manual Capsule Filling Board	View Details & Inquire

Pre-installation requirements: Total Power: 4.00 kW; Net Weight: 469 kg (1034.0 lb); Dimensions: 1490 × 723 × 1610 mm (58.7 × 28.5 × 63.4 in).

Compatible Applications & Materials

industrial products — primary target products for this Capsule Filling Machine line
Standard industrial materials compatible with the machine's rated spec range
B2B production lines and contract manufacturing workshops

Standard Operating Procedure (SOP)

Setup: connect the required power / air supply and verify the control display.
Parameter preset: set speed / temperature / pressure per the product spec.
Material loading: place the product in the correct fixture / mold slot.
Execution: start the cycle; monitor for stable, repeatable output.
Quality check: inspect the first units; adjust if deviation appears.
Safety & cooldown: use Emergency Stop on abnormality; allow cooldown before maintenance.

Engineering FAQ

What routine maintenance keeps the TSP-187 stable for long production runs?
A: Keep the working area clean, verify the rated power/air supply before each shift, and inspect wear parts per the technical manual. Stable input conditions are the main factor in consistent output and long service life.

Which product sizes and formats can the TSP-187 handle?
A: The machine is configured for its rated specification range (see Technical Specifications). For formats outside the standard range, CECLE can advise on tooling or model selection.