Labeling Machine Selector

Tell us what you are labelling and how big the label is. We'll show every CECLE labeller that fits — cheapest first — and flag the ones that need an air compressor, run on wet glue, or feed bottles automatically.

1 · What are you labelling?

This is the hard split — a round-bottle labeller cannot do corner seals, and bags need a paging feeder.

2 · Container diameter (mm)

The outside diameter of the round part.

3 · Label size (mm)

Label length × width. Too big and too small both fail.

Length

Width

4 · One side or two?

5 · Output

You need about 7 pcs/min.

Selection logic — how a machine gets ruled out

Container shape is a hard filter. Round bottles need a rolling station, flat bottles need a top belt, bags and cards need a paging feeder, and corner sealing needs its own head. Only machines built for your shape are shown.

Container size and label size are hard filters. Outside the window the label either will not peel or will overhang. Where CECLE has not published a window the machine is still listed and tagged Specs being confirmed — never assume it is unlimited.

Capacity is a soft filter. A machine slower than your target is labelled under capacity rather than removed — you can run it longer or add a shift.

Results are sorted cheapest first among machines that match your shape and sizes. Models with no published spec sink to the bottom.

Kraj/region

Język

Selection logic — how a machine gets ruled out