Heat Transfer Machine Selector

Tell us the shape of the part you transfer onto, plus its size, and we'll show every CECLE heat transfer machine that fits - cheapest first. Flat, round, tapered, buckets, slippers or skateboards: each shape uses a different machine family.

1 · What shape do you print on?

This is the hard filter and decides the machine family. A bucket machine cannot decorate a skateboard, and a flat press cannot wrap a cone.

2 · Largest transfer dimension (mm)

Hard filter. A machine is removed if its transfer area is smaller than this. Leave empty for “any”.

3 · Target speed (transfers/min)

Soft preference, not a filter. If a machine is slower than your target it stays in the list but is flagged “Under capacity”. Leave empty for “any”.

4 · Anything else you need?

Preferences, not filters — machines that lack them stay in the list, just ranked lower.

Every model here is pneumatically driven: an air compressor is required and is not included in the price.

Selection logic — how a machine gets ruled out

Workpiece shape is a hard filter and decides the machine family. Universal flat & round (HT-S-300), tapered (HT-C-200), large cylindrical buckets (HT-B-300 / SHT-B-300), footwear (THS-210 / HT-6437) and skateboards (HT-RB-300) are different machines. Pick “Plastic buckets” and only the two bucket machines remain.

Transfer size is a hard filter. A machine is removed and named if its transfer area is smaller than what you entered. The THS-210 quotes its size as “customised by products”, so it is never filtered out on size — confirm the die on WhatsApp instead.

Air compressor is not a filter here — every model needs one. The whole range is pneumatic (0.4-0.8 MPa depending on the model). Budget for a compressor and, for bucket machines, a 1:1 custom mould made from your bucket sample.

Target speed is a soft preference. The range runs from 5 transfers/min (bucket machines) to 15 transfers/min (footwear and universal). A machine below your target is kept and flagged “Under capacity” rather than dropped.

Results are sorted by fit, then cheapest first. The “Lowest cost” badge marks the cheapest machine that still matches your hard filters.

Prices are reference USD at the lowest published variant (EXW for some models, sea-to-door for others), so they are not directly comparable between models. Confirm the full landed cost on WhatsApp.

Ülke/bölge

Dil

Selection logic — how a machine gets ruled out